Graphic Commands And The Current Text Position - Xerox 4213 Programmer's Reference Manual

XES COMMAND LANGUAGE MODE

Graphic commands and the current text position

2-88
Figure 2-24. Graphic window rotation
If you do not specify coordinates for a graphic window origin
within the graphic window command, the printer will use the
current text position, that is, wherever the next character of text
would be, as a default point for the graphic window origin.
(Otherwise, text positioning and graphic window positioning are
independent from one another.)
If you place a graphic window at the current text position on a
page and add a paragraph to text above the graphic window, the
window moves down automatically. The current text position is
not affected by the creation of a graphic window. If you start
entering text after creating a graphic window, the characters will
begin printing after the last position in which text was entered on
the page. Figure 2-25 gives an example of the graphic window
relative to the current text position.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE