Xerox 4213 Programmer's Reference Manual page 140

XES COMMAND LANGUAGE MODE
2-102
Nongraphic line commands (Line Draw X and Line Draw Y)
cannot contain fill patterns even when defined within the
boundaries of a graphic window. Notice in figure 2-33 that the
pattern is contained only at the boundaries of the closed graphic
images.
Example Figure 2-33 is created in the following manner:
A graphic window is defined with the Graphic Window
•
command.
Line Draw X and Line Draw Y commands create the inner
•
rectangle. This is a nongraphic image.
A circle is drawn with the Graphic Arc command.
•
A line is drawn through the circle with Graphic Line
•
command. Note that it is defined so that it breaks as it
passes through the circle.
The outside rectangle is drawn with Graphic Box.
•
The Graphic Fill command selects pattern 17 and defines one
•
seed point between the inside of the graphic box and the
outside of the graphic circle.
E
gw,2;500,3000,700,700
E x553,2947,594,3
E x553,2350,594,3
E y553,2350,597,3
E
y1147,2350,597,3
E
ga5;350,350,100,0,360
E gl5;350,3,350,250
E gl15;350,450,350,697
E gb5;3,3,697,697
E
gf17;150,150
L
L
L
L
L
L
L
L
L
L
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE