Index - Xerox 4213 Programmer's Reference Manual

Variances
Conventions used in this manual
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Appendix D: Reference tables includes listings of control codes,
character code assignments.
Appendix E: XES compatibility lists which commands on the
Xerox 4235 printer are not supported on the 4213 printer.
Appendix F: Default format parameters contains margin and tab
default values in the XES emulation.
Appendix G: XES summary sheet
Also included is an Index.
The following differences exist between the 4213 and 4046 laser
printers:
- Pages may break differently on the two printers.
- To match rotation on the 4213, the 4045 must have an
XGRAPH cartridge installed.
- Set the page buffer to "FULL" to correctly print complex
pages.
- In XES mode, the underline character prints at the baseline
on the 4045; on the 4213, this prints under the character
descender.
The following conventions are observed in this manual:
The escape
E
represented with this symbol.
The line end (carriage return and line feed) is
L
represented with this symbol.
INTRODUCTION
character (ASCII 27, 1BH) is
xxi