Graphic Pie Chart
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Figure 2-33.
Purpose
Creates a complete pie chart, including fill patterns. You can also
offset single "slices" from the rest of the pie chart.
Syntax
E
gpT;X,Y,r,%1/F1/O1,%n/Fn/On
gp
T
;
X,Y
r
XES COMMAND LANGUAGE MODE
A fill pattern between the boundaries of two
graphic images, a circle and a rectangle
L
The instruction for a pie chart.
Line thickness of the figure. Line thickness should
not be greater than 1/2 the radius, otherwise
unexpected results may occur.
The semicolon is required. If it is omitted, the
command is ignored. Commas separate the other
variables.
The centre point of the pie chart. X is the
horizontal distance from the window origin to the
centre point. Y is the vertical distance from the
window origin to the centre point.
The radius of the pie chart.
2-103