Multiple Copies (Non-Collated) - Xerox 4213 Programmer's Reference Manual

XES COMMAND LANGUAGE MODE

Multiple Copies (Non-Collated)

Where to place it
2–20
Purpose Determines the number of uncollated copies printed when more
than one is desired.
Syntax
E +En,commentL
+E
n
,
comment
L
Anywhere on the first page of the document.
Example To print 50 copies of a document, request a Summary Sheet, and
print the comment "Distribute this to all committees," enter:
E+E50,Distribute this to all committeesL
Pages will not be collated; the output will be 50 copies of page
one, then 50 copies of page two, etc.
More At the end of the job, enter a Reset (E+X) command, unless you
want the same number of copies for the next job.
If n = 0, the command is ignored and defaults to printing one
copy.
The maximum number of copies that can be requested at the
printer control panel is 99.
Instruction to print multiple copies.
Indicates the number of copies to be printed, up
to 999 copies.
Optional request for a Summary Sheet, if enabled
through the printer control panel.
Optional comment on Summary Sheet.
Line end.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE