Stroke Weight - Xerox 4213 Programmer's Reference Manual

Stroke Weight

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Purpose The Stroke Weight command selects the degree of bolding.
There is a separate command for the primary and secondary
fonts. Medium weight fonts have a stroke weight of zero, light
weight fonts have a negative stroke weight, and heavy weight
fonts have a positive stroke weight. If the requested stroke
weight is zero or greater and the weight is not available, the
printer accesses the next heavier font. If the requested weight
has a negative value and is not available, the next lighter font is
used.
Syntax
E
(s#B
The Stroke Weight command for the secondary font is:
E
)s#B
where # is one of the values in table 3-9.
Example To request a medium primary font and a bold secondary font,
enter:
E
(s0B
Hex 1B 28 73 30 42
Dec 27 40 115 48 66
and
E
) s+3B
Hex 1B 29 73 2B 33 42
Dec 27 41 115 43 51 66
LJ SERIES 2D EMULATION
3-41