Font Unload - Xerox 4213 Programmer's Reference Manual

XES COMMAND LANGUAGE MODE

Font Unload

Using fonts in a document
2-34
Example To delete two fonts, "Classic8iso-L "and "Classic6iso-L," and to
request a Summary Sheet with the command "These two fonts
are now deleted" enter:
E +B,These two fonts are now deleted
Classic8iso-L,Classic6iso-L
File names must be entered exactly as they are named, including
upper and lower case letters, and punctuation.
Purpose Deletes all downloaded font files from the printer.
Syntax
E +U,commentL
+U
,
comment
L
Example To delete all fonts and to request a Summary Sheet with the
comment "All fonts are now deleted" enter:
E +U,All fonts are now deleted
If you are using only the default font in your document, you do
not need the commands discussed here. However, if you want to
access other fonts on the printer, instruct the printer with the
Font ID Assignment command. This command sets up your font
selections in an index and assigns an identification number to
each. You then select from this font index at any place in the
document with the Font Change command.
L
L
Instruction to delete stored font files.
Optional request for a Summary Sheet to report
errors upon execution of the next job command.
Optional comment on the Summary Sheet.
Line end.
L
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE