Xerox 4213 Programmer's Reference Manual page 63

2-sided (book)
Where to place it
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
To offset a mixed orientation job, use an E +P followed by an
E+Q at the beginning of the job.
Note: This command is ignored if the Output Offset feature is
disabled at the printer control panel.
Purpose Enables 2-sided printing "head-to-head
"head-to-toe").
of the second page.
Head-to-head 2-sided printing means that the page is printed in
the same position on both the front and back pages. This manual
is printed in regular head-to-head 2-sided page format.
Syntax
E zydnL
zyd Instruction to start 2-sided printing.
n The number of pixels by which the margin of the
second page is shifted.
the second page is printed without shifting.
The left margin is shifted regardless of the page
orientation.
Line end.
L
Before printable data on the first page to be printed 2-sided.
2-sided is entered after the printable data, it takes effect on the
next page, rather than on the current one.
More If you choose to shift margins, ensure that the margins have
been set within page boundaries so that none of the text runs
off the page.
Both 2-sided and 2-sided Inverted are cancelled by 2-sided Stop.
2-sided printing can be enabled either through the printer
control panel or with the printer commands.
commands override any defaults set through the printer control
panel.
Note: 2-sided printing is not supported in the manual bypass.
XES COMMAND LANGUAGE MODE
"
It also includes the option of shifting the margin
If no value is entered for n,
(see 2-sided Inverted for
If
The printer
2–25