Clear Horizontal Margins; Top Margin; Text Length - Xerox 4213 Programmer's Reference Manual

Clear Horizontal Margins

Top Margin

Text Length

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Purpose The Clear Horizontal Margins command causes the left and right
margins to be reset to their default values at the left and right
edges of the printable area.
Syntax
E
9
Hex 1B 67 39
Dec 27 103 57
Purpose The Top Margin command sets the distance between the top of
the printable area and the top of the text regardless of paper
orientation. The top margin is defined as a number of lines. The
height of the lines is determined by the Vertical Motion Index
(VMI) command, which sets the vertical spacing of lines.
VMI is used as a unit of measurement for setting the margin, but
once set, the margin does not change with later VMI commands.
Syntax
E
&l#E
where is the number of the line on which text starts.
#
To set the top margin at six lines, enter:
Example
E
&l6E
Hex 1B 26 6C 36 45
Dec 27 38 108 54 69
Purpose The Text Length command sets the number of lines on which
text may be printed. If the Vertical Motion Index (VMI) is zero, or
the sum of the text length and the top margin is greater than the
length of the printable area, the command is ignored.
LJ SERIES 2D EMULATION
The
3-23