Xerox 4213 Programmer's Reference Manual page 109

Where to place it
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Syntax
E s
l
s
Anywhere subscripting is desired, with the start command
immediately before the first character to be subscripted, the stop
command immediately after the last character to be subscripted.
Example To produce:
C H OH
2 5
Enter:
E E E E
C l2 sH l5
More The subscript commands cannot be used to:
Subscript a subscript
•
Index down a page
•
End a superscript.
•
The distance of a subscript character from a regular character
depends on the current font size. Thus, if you want to use a
smaller or larger font for the subscript, give the Font Change
command immediately after Subscript Start and return to the
original font before Subscript Stop.
In the example below, the regular letters are entered using font
number 5, and the subscripts are entered using the smaller font
number 6.
To produce:
C H OH
2 5
Enter:
E 5C E l E 62 E 5 E
To underline a subscript at its own level, give the Underline Start
command after the Subscript Start command.
Instruction to start subscripting.
Instruction to stop subscripting.
sOH
sH E l E 65 E 5 E sOH
XES COMMAND LANGUAGE MODE
2-71