Line Spacing; Cursor Positioning Commands - Xerox 4213 Programmer's Reference Manual

LJ SERIES 2D EMULATION

Line Spacing

Cursor positioning commands

3-26
Syntax
E
&l#C
where is the distance between rows in 48ths of an inch.
#
be between 0 and 336. The
of the decimal point. Use the following formula to calculate the
VMI:
VMI = 48 ÷ lines per inch
Example To print four lines per inch, set the VMI to 12:
E
&l12C
Hex 1B 26 6C 31 32 43
Dec 27 38 108 49 50 67
Purpose The Line Spacing command affects the VMI in lines per inch. The
command specifies the number of lines per inch to be printed.
Syntax
E
&l#D
where is one of the following valid settings for lines per inch:
#
1, 2, 3, 4, 6, 8, 12, 16, 24, 48.
Example To set line spacing at eight lines per inch, enter:
E
&l8D
Hex 1B 26 6C 38 44
Dec 27 38 108 56 68
The cursor positioning commands specify exactly where the next
character or graphic is to be placed on the page. These
commands define print position in 300ths of an inch (spots),
720ths of an inch (decipoints), and columns or rows.
is valid to four places to the right
#
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
must
#