Logging In To The J-Series Router; Logging In To The Tgm550 - Avaya IG550 Installing And Configuring

Upgrading an IG550 Integrated Gateway and a Juniper J4350/J6350 Services Router
2. Plug the RJ-45-to-DB-9 serial port adapter into the serial port on your personal computer
(Figure 46). Connect the other end of the Ethernet rollover cable to the console port on the
router (Figure
3. Turn on the power to the personal computer. Start Microsoft Windows Hyperterminal or
another asynchronous terminal emulation application. Select the appropriate COM port to
use, such as COM1.
4. Configure the port settings as follows:
Bits per second: 9600
●
Data bits: 8
●
Parity: none
●
Stop bits: 1
●
Flow control: none
●

Logging in to the J-series router

1. At the login prompt, type root and press Enter.
2. At the password prompt, enter the password.

Logging in to the TGM550

1. At the cli prompt (>), type ssh <login>@<ip_address>, where <login> is root or
another valid login, if previously administered, and <ip_address> is the IP address of the
TGM550, and press Enter.
The message, Are you sure you want to continue connecting? appears.
2. Enter yes.
3. At the password or challenge prompt, type the password and press Enter.
You are now logged-in.
- If you are prompted to change the root password, change the password to a password
agreed upon with the customer administrator.
164 Installing and Configuring the IG550 Integrated Gateway
46).