Avaya IG550 Installing And Configuring page 135

3. Verify that there is a response from the server.
4. At the TGM550-00<super># prompt, type one of the following commands, depending on
whether the file resides on an FTP server or a TFTP server:
For a TFTP server, type copy tftp SW_image<bank> <filename>
●
<tftp_server_ip_address> to transfer the image from the tftp server to the
TGM550 boot bank,
where <bank> is the nonactive boot bank (Bank A in the example),
<filename> is the full path name of the firmware image file, and
<tftp_server_ip_address> is the IP address of the TFTP server.
For example, type:
copy tftp SW_imageA firmware/tgm550_26_26_0.bin 195.123.49.54, where the file
tgm550_26_26_0.bin resides in a directory called firmware on a server with an IP
address of 195.123.49.54.
a. When the download is complete, the download status shows idle.
For an FTP server, type copy ftp SW_image<bank> <filename>
●
<ftp_server_ip_address> to transfer the image from the TFTP server to the
TGM550 boot bank,
where <bank> is the nonactive boot bank (Bank A in the example),
<filename> is the full path name of the firmware image file, and
<ftp_server_ip_address> is the IP address of the FTP server.
For example, type:
copy ftp SW_imageA firmware/tgm550_26_26_0.bin 195.123.49.54, where the file
tgm550_26_26_.bin resides in a directory called firmware on a server with an IP
address of 195.123.49.54.
A login prompt appears.
a. At the prompt, enter a login and password to complete the file transfer.
When the download is complete, the download status will show idle.
5. At the TGM550 command line, enter show download software status 10 to check
the status of the download.
6. At the TGM550 command line, type set boot bank bank-<bank>
where <bank> is the same letter that you entered in step 2.
For example, type:
set boot bank bank-A
7. Type copy running-config start-config.
Issue 2 January 2008 135