Avaya IG550 Installing And Configuring page 162

Upgrading an IG550 Integrated Gateway and a Juniper J4350/J6350 Services Router
TGM550 — Appropriate CAT5 harness cables with RJ11 connectors for one to two
●
analog trunk connections, one or two analog line connections, or both
TIM508 — A B25A unshielded 25-pair amphenol cable for one to eight analog line
●
connections. See
the pinouts.
TIM510 — An H600-383 Group 2 T1 cable with an RJ48C connector for T1/E1 trunk
●
connections
TIM514 — An RJ11 cable for one to four analog trunk connections, one to four analog
●
line connections, or both
TIM516 — A B25A unshielded 25-pair amphenol cable for one to 16 analog line
●
connections. See
the pinouts.
TIM518 — A B25A unshielded 25-pair amphenol cable for one to eight analog line
●
connections and one to eight analog trunk connections. See
Network cable specifications and pinouts
TIM521 — A CAT5 cable with an RJ45 connector for one to four BRI trunk connections.
●
For each trunk connection, insert the CAT5 cable into an NT1 device. Then, connect the
NT1 device to the 2-wire central office connection.
Juniper PIMs — see Juniper J2320, J2350, J4350, and J6350 Services Router Getting
●
Started Guide, Release 8.4.
2. Insert the cable connector into the port on the interface faceplate.
3. For the TIM508, TIM516, or TIM518, use the screw at the end of the Amphenol connector to
attach the connector to the left side of the TIM's Amphenol receptacle. Use a tie wrap to
attach the cable to the tie wrap loop to the right of the Amphenol receptacle.
4. Arrange the cable so that the cable does not become loose or develop stress points.
5. Secure the cable so that the cable does not support its own weight as the cable hangs to
the floor.
6. Place excess cable out of the way in a neatly coiled loop.
7. Place fasteners on the loop to help maintain the shape.
8. Connect the other ends of the cables to the wall field, punch down block, or other devices
as appropriate for trunk and line access.
Note:
For information on how to cable PIMs, see the Juniper J2320, J2350, J4350,and
Note:
J6350 Services Router Getting Started Guide, Release 8.4.
162 Installing and Configuring the IG550 Integrated Gateway
TIM508 on page 181 in
TIM516 on page 183 in
Network cable specifications and pinouts
Network cable specifications and pinouts
TIM518
for the pinouts.
for
for
on page 184 in