Disconnecting Dc Power - Avaya IG550 Installing And Configuring

Installing an IG550 Integrated Gateway with an existing Juniper J4350/J6350 Services Router

Disconnecting DC power

1. Ensure that the voltage across the DC power source cable leads is 0 V and that the cable
leads cannot become active during installation.
2. Disconnect the power cable lugs to the negative and the positive DC source power cables.
(Figure 40,
Figure 40: DC power connections to the 4350 chassis
126 Installing and Configuring the IG550 Integrated Gateway
or Figure 41).
h 3magnd1 LAO 100306