Reinserting The Tgm550 Module - Avaya IG550 Installing And Configuring

Removing and inserting TGM550 Field Replaceable Units

Reinserting the TGM550 module

1. Reinsert the TGM550 into the original slot. Align the notches in the connector at the rear of
the TGM550, with the notches in the slot in the router. Then slide the module in until it
lodges firmly in the router.
!
CAUTION:
Carefully slide the module straight into the slot to avoid damaging the connector
CAUTION:
components.
2. Drive the screws to hold the TGM550 module in place (see
3. Power on the router.
192 Installing and Configuring the IG550 Integrated Gateway
Figure 50).