Avaya IG550 Installing And Configuring page 65

Current System Time — Click the Set time now manually button to set the current
●
time, or click the Set time now via NTP button to automatically synchronize time with the
NTP server.
DNS Name Servers — In the box that is next to the Add button, type the IP address of a
●
DNS Name server. Click Add.
Domain Search — In the box next to the Add button, type the name of a domain in
●
which the router resides. Click Add. Repeat for any other domains.
Default Gateway — Type the IP address of the default gateway through which to direct
●
packets that are addressed to networks that the routing table does not explicitly list.
Loopback Address — Type the loopback address, which is a reserved IP address that
●
is always available on the router. If you do not enter an address, this address is set to
127.0.0.1/32.
ge 0/0/0.0 Address — Type the main IP address for access of the services laptop or
●
computer to the router or leave the default.
Allow Telnet Access — Click the box to turn on Telnet access.
●
Allow JUNOScript over Clear-text Access — Click the box to allow JUNOScript
●
access.
Allow SSH Access — Click the box to turn on SSH access.
●
2. Click Apply.
Issue 2 January 2008 65