Avaya IG550 Installing And Configuring page 105

Note:
The ge-0/0/0 port number is typically reserved for services access.
Note:
● set system name-server <IP_address>
where <IP_address> is the address of a DNS server on the LAN/WAN
set system services ssh root-login allow to allow access to the router with
●
ssh. This command is optional, based on customer requirements.
set system services telnet to allow access to the router with telnet. This
●
command is optional, based on customer requirements.
set system host-name <host-name>
●
where <host-name> is the name of the router to be accessed on the LAN or WAN
set system domain-search <domain_name>
●
where <domain-name> is the name of the network or subnetwork of the router
set system time-zone <time-zone>
●
where <time-zone> is the name of the time zone, identified by continent and city. Use
the ? option at the end of the command to see the list of time zones.
● set system ntp server <IP_address>
where <IP_address> is the address of an NTP server for time synchronization.
● set interface lo0 unit 0 family inet address
where <IP_address> is the loopback address of the router. The default is 127.0.0.1/32.
Tip:
To delete a configuration setting, type the relevant command but replace set
Tip:
with delete. For example, to delete the NTP server setting which you
configured using the set system ntp server command, type delete
system ntp server.
6. To review the configuration, type show configuration | display set, and press
Enter.
7. At the prompt, type commit.
The system commits the commands and resets. This process may take up to 10 minutes.
<IP_address>
Issue 2 January 2008 105