Avaya IG550 Installing And Configuring page 72

Installing an IG550 Integrated Gateway with the J-Web Quick Configuration interface
3. Configure the TGM550 on the physical VoIP Interface screen.
4. If desired, in the Physical Interface Description field, type a name for the TGM550.
5. In the box that is next to the Add button for the MGC List, type the IP address of the primary
controller or a C-LAN circuit card that is connected to the primary controller. Click Add.
Note:
Use commands on the TGM550 CLI to administer the transition point and
Note:
recovery timer for the operation of the MGC list. The default transition point value
is 1. The default primary search time is 1 minute. The total search time is 30
minutes.
6. Repeat Step
(LSPs). You can enter up to four destinations in the MGC list.
7. Click Apply.
72 Installing and Configuring the IG550 Integrated Gateway
5 for either an additional C-LAN card or for any local survivable processors