Ensuring Adequate Airflow; Unpacking Equipment - Avaya IG550 Installing And Configuring

Installing an IG550 Integrated Gateway with an existing Juniper J4350/J6350 Services Router
For the Communication Manager server, a license enabled for media gateway
●
announcements

Ensuring adequate airflow

1. Ensure that the airflow around the chassis is unrestricted. Allow at least 6 inches (15.2
centimeters) of clearance between the front and the back of the J-series router chassis and
adjacent equipment. Ensure that adequate circulation is present in the installation location.

Unpacking equipment

1. Remove all equipment from the box. Equipment includes:
The TGM550 Telephony Gateway Module
●
Any additional Telephony Interface Modules (TIMs) and Physical Interface Modules
●
(PIMs)
A grounding cable and cables for the TGM550, TIMs and PIMs.
●
!
CAUTION:
You cannot use a 14 AWG grounding cable with the router that hosts a TGM550
CAUTION:
and TIMs. The grounding cable must be 10 AWG.
A USB modem
●
Two different sets of console cables and adapters:
●
- An RJ-45 flat rollover cable and a DB-9 adapter for console connections to the
TGM550.
- An ordinary round RJ-45 Ethernet cable and a DB-9 adapter for console connections
to the Juniper router.
120 Installing and Configuring the IG550 Integrated Gateway