Reviewing Safety Requirements; Verifying Equipment; Ensuring Adequate Airflow - Avaya IG550 Installing And Configuring

that is readily accessible to the router over the LAN or WAN, the firmware can be uploaded
to the /tftpboot directory on the S8300 Server.
Note:
Use a Linux-based or a Unix-based TFTP server only if the customer already has
Note:
an existing one. In these cases, download the file to your laptop computer and
give the file to the customer for proper placement and execution. If the customer
does not have a TFTP server or an FTP server you can use, download a TFTP
server to your laptop to use with the firmware upgrades.

Reviewing safety requirements

1. See General Safety Guidelines and Warnings

Verifying equipment

1. Verify that you have the following on site:
Electrostatic discharge (ESD) grounding strap (not provided)
●
For rack or wall installation, flathead and Phillips head screwdrivers appropriate for the
●
screws or anchors (not provided)
For the Communication Manager server, a license enabled for media gateway
●
announcements

Ensuring adequate airflow

1. Ensure that the airflow around the chassis is unrestricted. Allow at least 6 inches (15.2
centimeters) of clearance between the front and the back of the J-series router chassis and
adjacent equipment. Ensure that adequate circulation is present in the installation location.
.
on page 187
Issue 2 January 2008 87