Avaya IG550 Installing And Configuring page 159

J6350
●
!
CAUTION:
If the Communication Manager server is already administered for the slots, the
CAUTION:
slots in which you insert the equipment must also match exactly how the slots are
administered on the Media Gateway screen in Communication Manager.
!
CAUTION:
The router must be turned off before inserting or removing the Avaya TGM550
CAUTION:
and TIM modules. These modules are not hot-swappable. If you attempt to
remove or insert these modules while the router is turned on, the router might
reset or malfunction in some other way.
The TGM550, TIMs, and most supported PIMs can be inserted into any slot on the routers.
However, the placement of some PIMs in router slots has the following limitations:
The ePIMs are limited to slots as indicated in the following table:
●
ePIM
JX-2FE-TX-S (2 x Fast Eth)
JXE-4FE-TX-S (4x Fast Eth ePIM)
JXE-1GE-TX-S (1 Port GigE ePIM)
JXE-1GE-SFP-S (1 Port SFP ePIM)
The JX-1DS3-S (1 x DS3) and JX-1E3-S (1 x E3) PIMs are not supported on the J2320
●
and J2350 routers.
The 16-port GigaE uPIM (16 Port uPIM) requires the space of two vertical slots.
●
Therefore, the 16-port GigaE uPIM can be inserted into slots as indicated in the following
table:
Slot numbers for
16-port GigaE uPIM
2. Ensure power is turned off.
3. Attach the blue filter inlet cover (see
Router and TGM550, front view (J4350 shown)
Juniper
NETWORKS
POWER
J4350
2, 3. 5,
or 6
1
2
3
RESET
TX/RX 0/0 LINK TX/RX 0/1 LINK TX/RX 0/2 LINK TX/RX 0/3 LINK
CONSOLE
CONFIG
10/100/1000
J4350 J6350 J2320
3 and 6 2, 3, 5, 6 not supported
3 and 6 2, 3, 5, 6 not supported
3 and 6 2, 3, 5, 6 not supported
3 and 6 2, 3, 5, 6 not supported
J6350 J2320
2, 3, 5, 6 3
Figure 12: Sample illustration of Juniper Service
on page 30).
4
5
6
0
J6350
1 4
1
2 5
3 6
AUX USB
h 3maslot LAO 061407
J2350
not supported
not supported
not supported
not supported
J2350
2, 4, or 5
Issue 2 January 2008 159