Changing Tcp/Ip Properties (Windows 95, 98, Nt 4.0, And Millennium Edition [Me]) - Avaya IG550 Installing And Configuring

Changing TCP/IP properties (Windows 95, 98, NT 4.0, and
Millennium Edition [ME])
1. Access your computer's network information using one of the following options.
Windows 95, 98, and NT: Right-click Network Neighborhood.
●
Windows ME: Right-click My Network Places.
●
2. Select Properties to display the Network dialog box.
3. Locate the TCP/IP properties as follows:
Windows 95, 98, and ME: On the Configuration tab, scroll through the installed network
●
components list to the TCP/IP part of the devices list. Select the TCP/IP device that
corresponds to your Ethernet card.
Windows NT: On the Protocols tab, select TCP/IP in the installed network components
●
list.
4. Select the Properties button.
5. In the TCP/IP Properties box, click the IP Address tab.
6. Click the radio button to Specify an IP address.
7. Enter the following:
IP address: 192.168.1.2
●
Subnet mask: 255.255.255.0
●
Note:
Record any IP addresses, DNS settings, or WINS entries that you change. You
Note:
may need to restore them later to connect to another network.
8. Disable DNS service as follows:
Windows 95, 98, and Me: Click the DNS Configuration tab. Verify that the Disable DNS
●
radio button is selected.
Windows NT:
●
a. If any IP addresses appear under DNS Service Search Order, make a note of them in
case you need to restore them later.
b. Select each IP address in turn and click the Remove button.

Changing TCP/IP properties (Windows 95, 98, NT 4.0, and Millennium Edition [ME])

Click the DNS tab.
Issue 2 January 2008 179