Replacing The Grounding Cable - Avaya IG550 Installing And Configuring

Figure 41: DC power connections to the 6350 chassis
3. Use a Phillips screwdriver to remove the clear plastic cover that protects the terminal block.
4. Within the terminal block, remove the screw that connects the cable lug to the -48 VDC
terminal and remove the cable.
5. Remove the screws that connect the power cable lug to the RTN terminal and remove the
cable.

Replacing the grounding cable

!
CAUTION:
The original grounding cable for J-series routers is 14-AWG. You must replace
CAUTION:
this cable with a 10-AWG cable.
Note:
The grounding cable must meet the following specifications:
Note:
- Be 10 AWG
- Able to handle up to 8 Amps of current
- Have a ring-type, vinyl-insulated TV14-6R lug or equivalent to accommodate the 10
AWG cable.
h 3magnd2 LAO 100306
Issue 2 January 2008 127