Avaya IG550 Installing And Configuring page 63

7. From your computer, open a browser and enter the IP address 192.168.1.1 in the address
field.
The Set Up Quick Configuration page appears.
Note:
If the login page appears, log in as root. For the first access to the router, you
Note:
normally do not need a password. Just press Enter. However, you must set a
new password before you commit the configuration. Check with your Project
Manager to get the password.
If you need to reset the password, go to password recovery procedure at
http://www.juniper.net/techpubs/software/jseries/junos83/jseries83-admin-guide/
user-auth-recover-root-pwd-section.html.
You can also reset the password by pressing the reset configuration button for
twelve seconds. However, this method also overwrites any configuration data you
may have entered with default configuration data.
!
CAUTION:
If you were not prompted for a password when logging in, you must assign a root
CAUTION:
password during the initial configuration.
Issue 2 January 2008 63