Ntdw61 Cp Pm Signaling Server - Nortel 1000E Maintenance Manual

34 Hardware maintenance tools
•
LED2 Off: no link, no activity
•
LED2 Green: link valid
•
LED2 Blink: link valid and activity

NTDW61 CP PM Signaling Server

NTDW61 CP PM Signaling Server card features includes the following:
•
Intel Pentium M 738 1.4 GHz processor
•
one hard disk drive
•
two compact flash (CF) sockets
—
—
•
1 GB of DDR RAM, expandable to 2 GB
•
two 100BaseT Ethernet ports
—
—
•
one 1 Gbps Ethernet port (not used on Signaling Server)
•
two serial ports
•
one USB port (not used on Signaling Server)
•
a reset (RST) button to cold start the Signaling Server
•
an initialize (INI) button to warm start the Signaling Server
CP PM Signaling Server LEDs
The status LED indications of the NTDW61 CP PM Signaling Server are
as follows:
•
Off: no power
•
Red: BIOS self-test running
•
Flashing red: bootrom and operating system (OS) loading
•
Yellow: applications loading
•
Flashing yellow: applications loaded successfully
•
Green: pbxLink up
•
Flashing green: pbxLink down
one internal 1 GB Fixed Media Disk (FMD)
one hot-swappable Removable Media Disk (RMD), which is
accessible on the faceplate.
LAN 0 used for ELAN
LAN 1 used for TLAN
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 02.07 22 December 2009
Copyright © 2004-2009 Nortel Networks. All Rights Reserved.