Clearing Alarms; Starting A Sat Session; Recording All Busyouts - Avaya S8700 Series Manual

Migrating from an S8700 Media Server to an S8710 Media Server

Clearing alarms

To clear alarms:
1. If Release 1.x, under Alarms and Notification, click View Current Alarms.
If Release 2.x, under Alarms, click Current Alarms.
2. Select the server alarms to be cleared and click Clear.
3. Resolve any major alarms using SAT commands and a terminal emulation application, such
as Native Configuration Manager or MS HyperTerminal.
Note:
Tasks
Note:
corruption
media server.

Starting a SAT session

To start a SAT session:
1. Open a terminal emulation application, such as Native Configuration Manager or MS
HyperTerminal.
2. Type 192.11.13.6 5023 and press Enter.
3. Log on as craft or dadmin and suppress alarm origination.

Recording all busyouts

To record busyouts:
1. Type display errors and press Enter. Look for type 18 errors and record any trunks
that are busied out, so you can return them to their busied-out state after the upgrade.
162 Migrating to the Avaya S8700 Media Server
Starting a SAT session
on page 164 are SAT commands and can only be done on the active
on page 162 through Checking for translation