On the S8500 Media Server
Shutting down the S8500 Media Server
To shut down the S8500 Media Server:
!
CAUTION:
Do not unplug a functioning server without stopping all processes first. Failure to
CAUTION:
do this corrupts the hard drive.
1. Under Server, click Shutdown Server then
deselect Restart Server after Shutdown.
select Delayed shutdown
2. Click Shutdown.
!
CAUTION:
Do not hold down the power button for more than a split second. Holding the
CAUTION:
button down too long causes the media server to reboot.
3. Press and release the power-control button on the front of the server.
The internal fan shuts off.
4. Disconnect any remaining cables from the media server.
Disconnecting the cables
To disconnect the cables:
1. Disconnect the laptop from the Services port.
2. Disconnect the power cord from the UPS.
3. Disconnect the power cord from the RSA.
4. Disconnect the modem from the RS-232 port on the SAMP or RSA card.
5. Disconnect the LAN connection (if used) from the Ethernet port on the SAMP or RSA card.
6. Disconnect the cable from the Ethernet port on the dual NIC (if used).
On the S8500 Media Server
Issue 4 January 2005
151