Clearing And Resolving Alarms; Enabling And Disabling The Ethernet Switch Ports - Avaya S8700-Series Installing And Configuring

1-15 use an administered rule. The rule is administered using the SAT command
l
daylight-savings-rules. For more information on the daylight-savings-rules, see
rules for daylight savings time
Note:
The daylight savings rule setting on this screen is the rule that is utilized by the
Note:
Communication Manager software. Additional daylight savings rules can be
implemented for the specific locations of hardware supported by the
Communication Manager software. For more information, see
necessary)

Clearing and resolving alarms

1. Current Alarms.
You can resolve alarms on the active server only.
2. Select the server alarms to clear and click Clear.
Note:
Use SAT commands or other standard troubleshooting procedures, to resolve
Note:
any major alarms.

Enabling and disabling the Ethernet switch ports

You might want to disable unused ports on the Avaya Ethernet switch, if used.
on page 74.
on page 75.
Clearing and resolving alarms
Setting locations (if
Issue 8 May 2009
Setting
77