Setting The Product Id; Logging Off All Administration Applications; Disconnecting From The Media Server; On The Active S8710 Media Server - Avaya S8700 Series Manual

Migrating from an S8700 Media Server to an S8710 Media Server

Setting the Product ID

Note:
It is different from the one on the S8700 Media Server.
Note:
To set the Product ID:
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter.
3. Log in as craft or dadmin.
4. At the prompt type productid -p number and press Enter. The variable product_id is
the product ID you received from the customer or the ART tool.

Logging off all administration applications

When you have completed all the administration, log off all the applications used.

Disconnecting from the media server

Disconnect the laptop from the media server.

On the active S8710 Media Server

Note:
This section applies to media server 1.
Note:

Accessing the active media server

To access the active media server:
1. Clear the ARP cache on the laptop if necessary. See
laptop on page 160 and return here.
2. Connect to the active media server.
3. Log in. See
190 Migrating to the Avaya S8700 Media Server
Accessing the media server
Clearing the ARP cache on the
on page 161.