Verifying Media Server Configuration; On Second S8710 Media Server; Installing Communication Manager And Restoring Files - Avaya S8700 Series Manual

Migrating from an S8700 Media Server to an S8710 Media Server

Verifying media server configuration

To verify the media server configuration:
1. Under Server Configuration, click Configure Server to start the configure server process.
2. Click Continue through the Review Notices to get to the Specify how you want to use
this wizard page.
3. Select Configure all services using the wizard.
4. Click Continue through all the screens, checking for new screens and new fields on
existing screens as mentioned in the Software Release Letter.
Note:
You must click through all the screens whether there are changes or not.
Note:
Note:
You may need to reset the port speeds for the Ethernet interfaces. The Ethernet
Note:
speeds should be set to AUTO-SENSE.
5. When you complete all the new fields, as necessary, click Continue on the Update System
screen. The Update System screen displays each configuration task as it completes. When
done, the screen displays the line All configuration information was entered.
6. Click Close Window to close the Configure Server wizard.
7. Disconnect from the media server.

On second S8710 Media Server

Note:
This media server becomes media server 2.
Note:

Installing Communication Manager and restoring files

To install Communication Manager and restore files:
1. Repeat tasks
parameters
!
CAUTION:
Make sure you restore the files from media server 2.
CAUTION:
184 Migrating to the Avaya S8700 Media Server
Powering up the media server
on page 174 and return here.
on page 170 through Configuring the network