Migrating from an S8700 Media Server to an S8710 Media Server
Shutting down the S8700 Media Server
!
CAUTION:
Make sure you are connected to the standby S8700 Media Server.
CAUTION:
To shut down the standby S8700 Media Server:
1. Under Server, click Shutdown Server.
2. On the Shutdown This Server window:
select Immediate Shutdown
deselect Restart Server after Shutdown
select Shut down even if this is the active server
3. Click Shutdown.
4. Disconnect the laptop from the Services port.
5. Disconnect the power cord from the UPS.
On first S8710 Media Server
Note:
This media server becomes media server 1.
Note:
Powering up the media server
To power up the media server:
Note:
You must place the CD in the drive before powering up.
Note:
1. Use a paperclip to open the CD-ROM drive on the media server.
2. Place the CD with Communication Manager in the CD-ROM drive.
3. Connect the AC power cord to media server 1 and to UPS 1 to power it up.
!
CAUTION:
Be careful not to push the UID button located above the power button. If you push
CAUTION:
this button, it will reset the UID on the media server.
4. Push the power button.
170 Migrating to the Avaya S8700 Media Server