Verifying Date And Time; Clearing And Resolving Alarms - Avaya S8400 Installing And Configuring

Chapter 7: Post-installation administration

Verifying date and time

Even though you set the date, time, and time zone through the Web interface on the media
server, you also must verify the date and time through SAT commands.
1.Type display time and press Enter.
display time
DATE
Day of the Month: 8
TIME
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED
2. Verify that the date and time are correct.
3. Verify that the correct rule (number) is displayed in the Daylight Savings Rule field.
4. If correct, press Cancel.
5. If not, go to the Maintenance Web Interface.
6. Under Server, click Set Server Time/Timezone.
7. Verify that the date and time are correct. If not, set it here.
8. Repeat steps 1 through 3.

Clearing and resolving alarms

1. On the Maintenance Web Interface, under Alarms, click Current Alarms.
You can only resolve alarms on the active media server.
2. Select the server alarms to be cleared and click Clear.
3. Resolve any major alarms using SAT commands or other standard troubleshooting
procedures.
60
Installing and Configuring the Avaya S8400 Media Server
DATE AND TIME
Day of the Week: Friday
Hour: 14 Minute: 19
Daylight Savings Rule: 0
Month: November
Year: 2002
Second: 36 Type: Standard
Page 1 of 1
February 2006