Verifying The Date And The Time; Clearing And Resolving Alarms - Avaya S8500 Installing And Configuring

Chapter 8: Postinstallation administration

Verifying the date and the time

Use SAT commands to verify the date and time.
1.Type display time and press Enter.
display time
DATE
Day of the Month: 9
TIME
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED
2. Verify that the date and the time are correct.
3. In the Daylight Savings Rule field, verify that the correct rule number is displayed.
4. If the rule number is correct, you are finished with this task.
5. If the rule number is not correct, go to the Maintenance Web Interface.
6. Under Server, click Server Date/Time. Verify that the date and the time are correct. If not,
set the correct date and the correct time.
7. Repeat Steps 1 through 3.

Clearing and resolving alarms

1. On the Maintenance Web Interface, under Alarms, click Current Alarms.
You can resolve alarms on the active media server only.
2. Select the server alarms to clear and click Clear.
3. Using SAT commands or other standard troubleshooting procedures, to resolve any major
alarms.
86
Installing and Configuring the Avaya S8500 Media Server
DATE AND TIME
Day of the Week: Friday
Hour: 14 Minute: 19
Daylight Savings Rule: 0
Month: June
Year: 2006
Second: 36 Type: Standard
Page 1 of 1
June 2006