Reaccessing The Media Server Using Telnet - Avaya S8700 Series Manual

3. On the Select Release Version screen, make sure the Build line and <OK> is highlighted.
Press Enter to partition the hard drive and reformat the partitions.
Once the drive is properly configured, the program begins the installation process and
reports the progress.
These processes can take up to 20 minutes. When the media server is ready to reboot, the
CD-ROM drive drawer opens. You must remove the CD from the drive at this time.
The reboot may take up to 3 minutes. The telnet session drops automatically.

Reaccessing the media server using Telnet

To reaccess the media server using Telnet:
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter to see if you get a login prompt. Repeat until
you get the login prompt.
3. Log in as craft.
4. Log onto the Maintenance Web Interface. See
and return here.
On first S8710 Media Server
Accessing the media server
Issue 4 January 2005
on page 161
173