Moving Cables To The S8710 Media Server (Media Server 2); Completing The Cable Migration; On The Standby S8710 Media Server; Accessing The Standby Media Server - Avaya S8700 Series Manual

Migrating from an S8700 Media Server to an S8710 Media Server

Moving cables to the S8710 Media Server (media server 2)

To move the cables:
1. Disconnect the cables from the previously active S8700 Media Server.
2. Connect the cables to the busied out S8710 Media Server (media server 2).

Completing the cable migration

To complete the cable migration:
1. Connect the CAT5 duplication cable to both media servers.
2. Connect the new yellow LC fiber optic cable to both media servers.
3. Connect the services laptop to the S8710 Media Server (media server 2).
4. Release the S8710 Media Server (media server 2). (See
page 187 and return here.)
5. Move the modem connections from the S8700 Media Servers to the S8710 Media Server.

On the standby S8710 Media Server

Note:
This section applies to media server 2.
Note:

Accessing the standby media server

To access the standby media server:
1. Clear the ARP cache on the laptop if necessary. See
laptop on page 160 and return here.
2. If not already connected to the standby media server, connect to it.
3. Log in. (See
188 Migrating to the Avaya S8700 Media Server
Accessing the media server
Releasing the media server
Clearing the ARP cache on the
on page 161 and return here.)
on