116
Installing an Avaya SCC1 Media Gateway Stack
Connect Optional Battery Leads
To prevent the internal batteries from discharging, the Control media gateway is shipped with
the battery leads disconnected.
1
Set the circuit breakers OFF. See
— Right Side'' on page
2
Connect the battery leads. The battery is near the top of the carrier toward the front-right.
The battery leads are located next to the battery and are accessible from the front of the
media gateway.
Expansion Control Media Gateway Battery Location — Right Side
Figure notes
Battery
1
2
Battery Lead Connector
3
Circuit Breakers (Located Between plates)
Media Gateway Single-Point Ground Block
4
''Expansion Control Media Gateway Battery Location
116.
1
2
October 2002
3
4
4_3 LJK 031096