Install Telephones Used For Emergency Transfer And As Normal Extension (Trunk/Auxiliary Field) - Avaya S8700 Installing Manual

4 Connect ST leads on the yellow emergency transfer row/connecting block for each
emergency transfer telephone to the assigned terminal in the blue or white station
distribution field. The ST terminal leads should be terminated on the following pairs: 1,
4, 7, 10, 13, 16, 19, or 22 (the first pair of any 3-pair group).
Install the telephone:
5
• Connect telephone to the information outlet.
Install patch cords/jumper wires between the media gateway side and the station
•
side of the station distribution field on the MDF.
Install Telephones Used for Emergency Transfer
and as Normal Extension (Trunk/Auxiliary Field)
1 Connect a pair of wires between the -48V and GRD terminals on the yellow emergency
transfer row/connecting block to the EM TRANS RELAY PWR terminal. See
''Connections for Telephone Used for Emergency Transfer and as Normal Extension'' on
page 274.
Connect CO trunk leads from the purple field to TC terminals on the yellow emergency
2
transfer row/connecting block for each trunk.
Connect CO trunk leads from the green field to TK terminals on the yellow emergency
3
transfer row/connecting block for each trunk.
Connect telephone leads from the purple analog line circuit pack row/ connecting block
4
to the LC terminals on the yellow emergency transfer row/connecting block for each
telephone.
Connect ST leads on the yellow emergency transfer row/connecting block for each
5
emergency transfer telephone to the assigned terminal in the blue or white station
distribution field.
6 Install the telephone:
Connect telephone to the information outlet.
•
• Install patch cords/jumper wires between the media gateway side and the station.
October 2002
Installing and Wiring Telephones
275