Installing The Avaya G700 Media Gateway - Avaya S8700 Installing Manual

Installing the Avaya G700 Media
Gateway
An Avaya G700 Media Gateway or an Avaya G700 Media Gateway with an S8300 Media
Server configured as a Local Spare Processor (LSP) may be added to either a S8700
Multi-Connect or IP Connect configuration. To add a G700 Media Gateway, you must have a
TN799DP C-LAN circuit pack installed in the MCC1, SCC1, or G600 Media Gateway. The
G700 is an endpoint on the C-LAN circuit pack. A sample configuration is shown in
configuration showing an Avaya MCC1 Media Gateway with an Avaya G700 Media Gateway''
on page 140.
The general process for adding an Avaya G700 Media Gateway to an existing Avaya MCC1,
SCC1, or G600 Media Gateway follows:
Install the MCC1, SCC1, or G600 Media Gateway
•
• Install and configure the G700 Media Gateway.
Add the media gateway to the S8700 translations
•
• Install a TN799DP (V5 or higher) C-LAN circuit pack
Administer the C-LAN circuit pack by
•
Adding the node names and IP addresses for each G700 Media Gateway being
•
added on the IP Node Names screen
Filling in the required fields on the IP Interfaces screen
•
• Enabling the Ethernet port.
Refer to
administering a TN799DP C-LAN circuit pack.
For complete information on how to install and configure an Avaya G700 Media Gateway, refer
to Installation and Upgrades for the Avaya™ G700 Media Gateway controlled by an Avaya™
S8300 Media Server or an Avaya™ S8700 Media Server (555-234-100).
''Administer the TN799DP'' on page 219
October 2002

Installing the Avaya G700 Media Gateway

for more information on
139
''Sample