Avaya S8700 Installing Manual page 113

Connections Using DC Power Distribution Unit
Figure notes
1 Media Gateway Stack
DC Power Cabinet
2
3 DC Power Distribution Unit (position to right of the media gateway stack
White Wire (connect to Circuit Breaker). See inset.
4
Green Ground Wires and Black Wire (connect to the -48 VDC Return Bus)
5
6 -48 VDC Bus
Inset
7
8 12 in. (30.5 cm) from floor to DC Power Distribution Unit
9 DC Power Cable to Power Connector on Each Media Gateway.
DC Power Distribution Unit Power Cord (route to rear of DC Power Cabinet)
10
11 Route Power Cord Through Sliding Door
12 Circuit Breaker
Supplied #10-32 Screw, #10 Star Washer, and #10-32 Hex Nut
13
14 Inset Showing DC Power Connector (Male)
Installing an Avaya SCC1 Media Gateway Stack
October 2002
113