Digital Tie Trunk Example - Avaya S8700 Installing Manual

3 Install cross-connect jumpers to connect the pins from the tie trunk circuit pack to the
appropriate leads on the external tie trunk.
''Analog Tie Trunk Wiring'' on page 245
4
another media gateway tie trunk. Names of the tie trunk leads must be determined from
the manufacturer or supplier of the external trunk circuit.
5 Administer on the Trunk Group screen on Avaya Site Administration. Refer to the
Administrator's Guide for Avaya MultiVantage Software for more details.
Analog Tie Trunk Wiring
Figure notes
External Trunk or Adapter
1

Digital Tie Trunk Example

This example shows how to connect digital tie trunk wiring from one media gateway to another
one or any other Avaya configuration.
connections.
1 Install cross-connect jumpers to connect the pins from the digital trunk circuit pack to
appropriate pins on the manufacturer's or supplier's external digital trunk.
2 Set option switches on the port circuit pack (Digital Trunk).
3 Refer to the Job Aid entitled
Administer on the DS1 and Trunk Group screens through ASA. Refer to the
4
Administrator's Guide for Avaya MultiVantage Software for more details.
shows a media gateway tie trunk connected to
T.1 26
1
R.1
T1.1
27
R1.1 2
E.1
28
M.1
3
Tie Trunk Circuit Pack (Position 1C05)
2
''Digital Tie Trunk Wiring'' on page 246
Option Switch Settings
October 2002
Installing and Wiring Telephones
29 T.2
4 R.2
30 T1.2
R1.2
5
31 E.2
6 M.2
tie_wire RBP 071796
shows the
for detailed information.
245