Avaya S8700 Installing Manual page 189

2 Hold the panel against the mounting surface and mark the mounting screw locations.
Drill pilot holes at the marked locations and partially install a locally obtained #12 x
3/4-inch screw into the two bottom mounting slots.
3 Slide the sneak fuse panel onto the mounting screws and tighten the screws securely.
Install a locally obtained #12 x 3/4-inch screw into the top two mounting slots and
4
tighten securely.
Repeat the procedure for each sneak fuse panel.
5
Secure the B25A cable to the panel with the captive screw on the connector and a
6
supplied cable tie.
Model 507B Sneak Fuse Panel
Figure notes
1 Sneak Fuse Panel
25-Pair Male Connector (In)
2
25-Pair Female Connector (Out)
3
Sneak Fuse Connector Pinout
Connector Pin Numbers
26/1
27/2
28/3
29/4
30/5
Patch Cord/Jumper Installation and Administration
Sneak
Current
Protector
507B
sneak CJL 032096
4
Pair/Fuse Number
1
2
3
4
5
October 2002
220029 Fuses (Inside Panel). Use
small screwdriver to pry top cover off.
189