Avaya S8700 Installing Manual page 210

210
Connect the Hardware
NOTE:
The craft login used on the IPSI has a different password than the craft login used on the
media servers.
7 Log in as craft.
Prompt = [IPADMIN]:
Type set control interface <ipaddr><netmask>, where <ipaddr>is the
8
customer-provided IP address and <netmask> is the customer provided subnet mask.
Press
9 Type show control interface. Press Enter.
The IP address, subnet mask, and default gateway information will be displayed.
Verify that the proper information was entered.
If required type set control gateway <gateway>, where <gateway> is the
10
customer-provided IP address for their gateway. Press
11 If required use the set vlan priority, set vlan tag, set vlan id and set diffserv commands
to enter VLAN and diffserv parameters for the IPSI. Use the help <command> to obtain
syntax guidelines for these commands.
Type reset. Press Enter
12
Answer Y to the warning.
.
Enter
October 2002
Enter.