Refer to the filled-out job aid entitled Pre-Installation Network Planning Forms—S8700 Media
Server for information on how to access a computer on the customer's network.
Connect a customer-supplied CAT5 straight-through cable from media server 1, port 4
1
(Eth4), to the customer's LAN. Refer to
Server with MCC1 or SCC1 Media
NOTE:
For security reasons, you may not be able to ping out to the customer's network. If you are
not able to, look at the LAN security settings, particularly icmp.
Under Security click Set LAN Security
2
3
If icmp is not checked, check both boxes to the left and click Set Security.
Getting Started with the Avaya™ S8700 Media
Gateway.
October 2002
Configure Media Server 1
39