Ripple; Power Connectors And Cables - Western Digital Re EX800M Technical Reference Manual

EX800M
2.4.5
Maximum
Frequency
2.4.6
SATA Connectors
For information on SATA data connectors, refer to the Serial ATA 1.0 specification available for
download at www.serialata.org.
At the time of this printing, there are no published standards for SATA power/mating connectors or
power/data cable wire gauges.
Cabling Requirements for SATA
The SATA cable consists of four conductors in two differential pairs. The cable may also include drain
wires to be terminated to the ground pins in the SATA cable receptacle connectors. See the SATA 1.0
specification for cable specifications. The cable's maximum length is one meter.
It is recommended that customers use SATA cable receptacles with internal bumps to provide
additional retention when mating with an enterprise hot-plug optimized hard drive connector.
2679-771339-A05

Ripple

+12 VDC
200 mV (double amplitude)
0-30 MHz

Power Connectors and Cables

RELEASED 8/13/13
+5 VDC
100 mV (double amplitude)
0-30 MHz
Specifications
11