Setting the Energy Saver Option
You can set the Energy Saver for the printer. The printer switches to the Energy Saver mode after the specified time.
NOTE:
•
If the Panel Lock Set is set to Enable, you need to enter the four digit passcode to enter the Admin Settings menu.
To set the Energy Saver:
1
Press the
(System) button.
2
Select the Tools tab.
3
Select Admin Settings.
4
Select System Settings.
5
Select General.
Select Energy Saver.
6
Select Low Power Timer or Sleep Timer.
7
Select the
or
You can select from 1–60 minutes for Low Power Timer or 1–6 minutes for Sleep Timer.
8
To return to the previous screen, select
or enter the desired value using the number pad, and then select OK.
.
Using the Operator Panel Menus and Keypad
341