Table of Contents
Advertisement
Specifying Destination using the Keyboard Screen
When the Additional G3 Port (optional) is installed, you can set the line (port) and send
faxes. Local terminal information can be registered to each line. You can use a line for
your purpose.
For information on local terminal information, refer to "Local Terminal Information" (P.320).
1
Select [Keyboard] on the [Basic
Features] screen.
2
Enter "<", "port number", ">", and
"telephone number" with the
keyboard that appears on the touch
screen.
3
Press the <Start> button.
Note
Entering Specific Symbols
When specifying a recipient, you can use the following features to enter specific
symbols from the touch screen.
Feature
Enter pause
Transmit using a
password
Transmit DTMF
signal
Transmit PB
(from dial pulse
to tone)
Note
• The port numbers are "1", line 2 (LINE 2 jack)
• You can specify line 2 and line 4 when an option is installed.
Button
- or
<Pause> (-)
S
!
:
• When using the DTMF method, use specific symbols. For information on the DTMF method,
refer to "Remote Mailbox (Using Remote Mailbox)" (P.133), and "Broadcast" (P.144).
"2" and line 4 (LINE 4 jack)
Function
One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. by additional button
presses.
When a password has
been set, transmission
will only start if the
password matches the
ID number on the remote
terminal.
Use to transmit the
DTMF signal.
Switches the dial type
from pulse to tone when
the Fax service is used.
Basic Features
"4".
Input method
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
1. Select [Keyboard] in
the [Basic Features]
screen to display the
keyboard.
2. Select
[Alphanumeric].
3. Select [S].
(Example)
0312345678S12345678
1. Select [Keyboard] in
the [Basic Features]
screen to display the
keyboard.
2. Select [Symbol].
3. Select [!].
(Example)
0311123456!123#
1. Select [Tone (:)] on
the [On-hook] or [Off-
hook] screen.
115
4
Advertisement
Table of Contents
