9.4.2.3
Installing the slot cover
V
CAUTION!
Always replace slot covers into unused PCI slot openings to comply with
applicable EMC regulations and satisfy cooling requirements.
Figure 195: Installing a slot cover
Ê Insert a slot cover into the unused PCI slot opening (1).
Ê Clip on the slot cover clamp (2).
Ê Fold down the locking handle on the slot cover clamp until it locks in place
(3).
9.4.2.4
Concluding steps
Ê If applicable, install the SAS expander holder, see section
SAS expander holder" on page 254
Ê Install the system fan module, see section
on page 83
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
"Resuming BitLocker functionality" on page 117
Ê
TX1330 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the system fan module"
"Installing the
287