Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 467

HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
LAN indicators
Figure 337: LAN indicators
Pos. Indicator
LAN
1 link/transfer
indicator
LAN speed
2
indicator
TX1330 M4
Status Description
A LAN connection has been
green on
established.
off LAN is not connected.
flashing
LAN data transfer is in progress.
green
yellow on Data traffic at a transfer rate of 1 Gbit/s.
Data traffic at a transfer rate of
green on
100 Mbit/s.
Data traffic at a transfer rate of
off
10 Mbit/s.
Upgrade and Maintenance Manual
Appendix A
467