Removing A Pcie Expansion Card From A Riser Module; Installing The Slot Cover Riser Module 1; Concluding Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Expansion cards and backup units
8.5.2.2

Removing a PCIe expansion card from a riser module

Figure 169: Example: Removing an expansion card from a riser module
Ê Remove the screw (see circle).
Ê Carefully remove the expansion card from its slot.
8.5.2.3

Installing the slot cover riser module 1

Ê Insert the slot cover.
Ê Fasten the slot cover with the screw.
8.5.2.4

Concluding steps

Ê Install the riser module 1 as described in section
1 (HL)" on page 85
"Reassembling" on page 73
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 120
Ê
270 Upgrade and Maintenance Manual
"Installing the riser module
RX2540 M2